HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)
Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
6010 9308
You set thesamepathmore
than once. The duplicate
paths are excluded.
Since there were overlapped
paths in the added paths,
the
overlapped paths were
eliminated. Click [OK] and
continue.
W 0
6010 9 309
All paths which you set have
already been registered.
This operation will terminate
because there is no path
which can be added.
Sinceall theadded paths
overlapped, the operation
of
adding paths cannot be
executed. Click [OK] and
continue.
W
0
6010 9310
You set the
same SSID more
than once.
Duplicate SSIDs
are exclu
ded.
Since ther
ewereoverlapped
SSIDs in th
eadded SSIDs,
the
overla
pped
SSIDs were
eliminat
ed. Click [OK], and
continue
.
W
0
6010 9311
All SS IDs which you set have
already been registered.
This operation will terminate
because there is no SSID
which can be added.
Sinceall theadded
SSIDs are overlapped,
the
operation of adding
SSIDs cannot b e executed.
Click [OK], and continue.
W
0
6010 9316
Through this operation,
M-VOL status will be
changed to Simplex mode
even if the M-VOL is online
to
the host.
Please follow the instructions
in
the message.
W
0
601
0
931
7
The d
estination volume
of
th
especified volume
pair
may contain some
inc
onsistency because
vol
ume
copy is not
com
pleted yet. Full volume
in
itialization is required
be
fore re-using it.
Please follow the instructions
in
the message.
W 0
6010 9318
As a result of this operation,
you will not be able to
re-start ERASE R-VOL
operation.
To delete the pair, even
though
you cannot
re-execute the R-VOL
deletion, click [OK]. If
not, click [Cancel].
W
0
6010
9324
The specified operation is
prohibited while the script is
running.
Try again after the script
ends.
W
0
6010 9325
The script is terminated
forcibly .
Click [OK].
i
0
6010 9327
The monitoring time is over,
but
the history file is not fully
updated yet.
Please click [Refresh] to
update the history file. If
this problem persists, call
technical supp ort.
W
0
6010 9332
This operation is n ot applied
yet.
Click [OK], then continue
the
operation.
i
0
6010 9337
The requested operation has
started.
The requested operation has
started. Click [OK] to close
the
dialog.
i
0
232
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes