HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)
Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
6010 93 60
The specified value exceeds
the
range. Alternatively,
the
relationship between
the
specified values is not
appropriate.
Check the specified values
and
retry the operation.
W
5
6010 5503 5
If you plan to create a pair
with the specified LUSE
volumes, a DK C path is
required.
Select Add RCU command,
then register a DKC path.
W 4
6010 55202
The subsystem specified
by Controller ID is not
available for the particular
CU
selected from the tree.
Find the CUs
that can be
used by the s
torage system
specified by the Controller
ID.
W
0
6010 55203
There are no initiator ports
that can be used by the
subsystem specified by
Controller ID.
Find the p orts that ca n be
used
by the storage system
specified by the Controller
ID,and setthemasinitiator
ports.
W
0
6010
55204
The M-VOL or R-VOL is not
supported by the specified
RCU.
Check the settings of the
specified RCU, M-VOL and
R-VOL.
W
0
6010 56 537
There are no consistency
groups available for the
CLPR of
the
specified
volume
s. Please register the
consi
stency groups and then
retry
the op eration.
Please register the
consistency g roups, then
retry the operation.
W
0
6010 56 540
The siz e of the specifi ed file
exceeds 8 megabytes, so
the
file cannot be uploa ded.
Check the size of the file,
decrease thesizeand retry
the operation.
W 0
6010 59001
Are you sure you w ant to
cancel
the change operation
of the
option parameter that
you specified?
To cancel the change
operation of the option
parameter, click [OK].
Otherwise, click [Cancel].
W
5
6010 59011
Are
you sure you want to
out
put the %s file?
To output the file, click [Yes].
Otherwise, click [No].
i
0
6010 59012
The %s file does not exist.
Click [OK].
i
0
6010 59013
The specified file already
exists. Do you want to
overwrite this file?
To overwrite the file, click
[Yes]. Otherwise, click
[No].
W
0
6010 59025
You c annot specify two or
more pairs in the same CT
group, if Group is selected
a
s
the Range of these pairs.
O
nly one pair is displayed
i
nthe Previewlist.
Ch
eck the CT group or
the range of the specified
p
air(s). If necessary, select
t
he
pair(s) again.
W
0
6010 59026
The specified RCU has been
already set. Check the RCU
parameter settings.
Check the RCU parameter
settings.
W
0
XP24000 Remote Web Console Error Codes
233