HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
0003
1024
An error occurred. If this
problem persists, please call
technical support.
Fibre topology information is
invalid. (The specified value
is not
in the specification.)
The error does not occur
normally because it is
guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical supp ort.
E
2
0003 1025
The specified LU path does
not exist.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
0003 1027
The specified value of the
command
device setting is
invalid. Check the setting.
The specified value of the
command device setting is
invalid
.(The specified value
is not
in
the
specification.)
The erro
rdoesnot occur
normal
ly because it is
guarde
dinthe screen.
In the
u
nlikely event that
this
e
rror occurs, contact
techn
ical support.
E
2
0003 1028
The number of volumes you
intend to combine into a
LUSE volume exceeds the
maximum.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
0003 1029
An error occurred during
SVP processing. If this
problem persists, please call
technical support.
If this problem persists, call
technical supp ort.
E
2
0003 1030
An
error occurred during
SVP processing. If this
problem persists, please call
technical support.
If this problem persists, call
technical supp ort.
E
2
0003 1031
An error occurred during
SVP processing. If this
problem persists, please call
technical support.
If this problem persists, call
technical supp ort.
E
2
0003 1032
The specified extent is over
the
size which can be
specified.
Set the extent area within the
size which can be specified,
then
retry the operation.
E
6
0003 1033
An error occurred during
SVP processing. If this
problem persists, please call
technical support.
If this problem persists, call
technical supp ort.
E
2
0003
1034
An error occurred during
SVP processing. If this
problem persists, please call
technical support.
If this problem persists, call
technical supp ort.
E
2
24
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes