HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
8105 1011
An error occurred. If this
problem persists, please call
technical support.
Thevolumewhich linksas
an
expanded LU extend
over CU#. The error does
not
occur normally because
it is
guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical supp ort.
E
2
8105 1012
LU path is set to a volume
which links as an expanded
LU.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
8105 1013
The emul
ation types of the
volumes
combined into a
LUSE vol
ume are not the
same.
The emulation type of a
volume which links as an
expanded LU is not the
same. The error does not
occur normally because it
is
guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical supp ort.
E
2
8105 1015
LU path is set to the releasing
expanded LU. (You need to
release the expanded LU
and path a t the same time.)
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
8105 1018
An error occurred. If this
problem persists, please call
technical support.
The specified p ort does not
exist. You have specified
a
wrong port number. Or
the
specified port type
(exclusively for mainframe)
cannot
be processed in this
agent. The error does not
occur normally because it
is
guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical supp ort.
E
2
8105 1022
An error occurred. If this
problem persists, please call
technical support.
Host mode is invalid. (The
specified value i s not in the
specification.) The error
does
not occur normally
because it is guarded in
the
screen. In the unlikely
eventthatthiserror occurs,
contact technical support.
E
2
8105 1023
The specified fiber address
is
wrong.
Correct the specified
content, and issue the
request again. (Currently,
Bad
Value Send report in
Set
Response.)
W
5
338
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes