HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)
Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
8105
1111
An error occurred. If this
problem persists, please call
technical support.
Anicknameisnot specified
when the configuration
change of LUN-Security is
requested. The error does
not
occur normally because
it
is guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical support.
E
2
8105 1116
An error occurred. If this
problem persists, please call
technical support.
You have not specified
the value when registering
WWN,orzeroisset as
theWWN value. Theerror
does not
occur normally
because it is guarded in
the screen. In the unlikely
eventthatthiserror occurs,
contact technical support.
E
2
8105 1123
Command
device security
cannot
b
eset to thespecified
volume
because the volume
is not a
command
device.
The Confi
guration
information has been
already changed.
Please check the settings
and
req
uest the
setting of the
configuration information
again.
E
6
8105 1124
An error occurred. If this
problem persists, please call
technical support.
The command device setting
and the command device
secur ity setting are incorrect.
You cannot do any of
the
following to the same
volume:
•
Specify the volume as
a
command device and
disable command device
security on the volume.
•
Specify the volume as
a
non-command device
and e nable command
device securit y on the
volume.
The setting method of
command device/command
device security is incorrect.
The following set tings are
invalid. *Set command
device + Release command
device security
*Release command device
+
Set command device
security
It
does not occur normally
because it is guarded in
the screen. In the unlikely
eventthatthiserror occurs,
contact technical support.
E
2
8105 1125
There are no host groups
where the WWN will be
registered.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
8105 1126
A volume set as a command
device cannot be used as
a
component of a LUSE
volume. Select another
volume.
Correct the specified
contents, and request again.
E 5
XP24000 Remote Web Console Error Codes
341