HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
8105
1354
Failed to add the WWN to
the
initiator port.
The port you are trying to
set is for Fibre Continuous
Access. You must change
the attribute when adding a
WWN. Attribute (TarGet or
RCU TarGet)
E
2
8105 1355
Thehostmodeofthe host
group connected to the
Initiatorportcannotbe
changed.
The port you are trying to
set is for Fibre Continuous
Access. You must change
the attribute when adding a
WWN. Attribute (Target or
RCU Target)
E
2
8105 1356
The host group cannot be
added to the Initiator p or t.
The port yo
u
are trying to
set is for Fibre Continuous
Access. You must change
the attribute when adding a
host group. Attribute (Target
or
RCU Target)
E
2
8105 1357
S-VOLs remain on the
Fibre-RCU port. This
operation may cause a
fatal damage to the S-VOLs.
Please stop this operation.
If
you want to c ontinue this
operation, please remove
theS-VOLsfromthe RCU
port first.
The specified Port is for Fibre
Continuous Access. Please
delete a logical path, then
retry the operation.
E
6
8105 1362
TheLUSEvolumecannot
be
configured because the
external volumes do not
have the same cache mode.
Check the attributes of the
external volumes, then retry
the operation.
E
6
81
05
1364
Theporttypeisincorrect.
Ch
eck the port type, then
re
try the operation.
W
5
8105 1600
This functionality is not
available. LUN Manager is
required.
Install the necessary
program product. When an
SLPR is allocated, install a
necessary program product
for the SLPR.
E
6
8105 1601
This functionality is not
available. Open Volume
Management is required.
Install the necessary
program product. When an
SLPR is allocated, install a
necessary program product
for the SLPR.
E
6
8105
1904
The specified volume cannot
be assigned as a LUSE
volume or a command
device, and the path of
thevolumecannotbeset
because it is being used as
a
Pool volume.
Select another volume.
E
6
8105 1905
There are virtual volumes
and
non-virtual volumes in
the
volumes specified to
compose a LUSE volume.
Select another volume.
E
6
XP24000 Remote Web Console Error Codes
345