HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)
Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
8505 5502 3
An attempt has been made
to
either register newly
aSLPRthat isalready
registered, or delete a SLPR
that is not registered.
Correct the SLPR settings,
then retry the o peration. If
this problem persists, call
technical support.
E 5
8505
55024
Some parity groups are
already registered in a
different CLPR.
Specify a different p arity
group, then retry the
operation. If the same
problempersistsdespite
retrying, call technical
support.
E 5
8505 5502 5
The incorrect settings of
parity group a re contained.
Correct the settings of
parity group, and retry
the operat
ion. If the same
problem p
ersists despite
retrying
,call technical
support.
E 5
8505 5502 6
The specified port name
(port number) is invalid.
Specify the correct port
name (port number), then
retry the operation. If
this problem persists, call
technical support.
E 5
8505 5502 7
The cache siz e is incorrect.
CLPR No:%s(SLPR No:%s)
Correct the settings of the
cache size, then retry the
operation. If this problem
persists, call technical
support.
E 5
8505 5502 8
The sp
ecified cache size
exclu
ding the Cache
Resi
dency Manager size
is
le
ss
than the minimum
requ
ired.
CLPR
No:%s(SLPR No:%s)
Set the cache size to be
equal to or greater than the
required minimum value,
then retry the o peration. If
this problem persists, call
technical support.
E 5
8505 5502 9
Thetotal cachesizeis
incorrect.
Setthe cachesizecorrectly,
then retry the o peration. If
this problem persists, call
technical support.
E 5
8505 55033
The same port is already
registered in a different
SLPR.
Assign a different port name
(port number), then retry the
operation. If this problem
persists, call technical
support.
E 5
8
505
5
5228
This function is not available.
HP
StorageWorks XP
D
isk/Cache Partition is
r
equired to create SLPR or
CLPR.
Install the program product.
E 5
XP24000 Remote Web Console Error Codes
359