HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
8505 58312
The configuration cannot be
changed because the write
pending
rate of the intended
CLPR is too high. Please
wait until the write pending
rate falls, and then retry the
operation.
Please wait until the write
pending rate falls, then retry
the operation.
i
5
8505 58313
The configuration cannot
be
changed because the
available Cache Residency
Managersizeorthe
number of Cache Residency
Manager areas in the
intended
CLPR is insufficient.
Please check the Cache
Residency Manager size
and
the number of Cache
Residency Man ager areas.
Please check the Cache
Residency Manager size
and
the number of Cache
Residency Manager areas.
i
5
8505 58315
A maintenance job is
running in the storage system
(Corre ction Copy, Drive
Copy, LDEV formatting,
LDEV shredding, and
Extent shredding). Retry
the
op
eration after the
main
tenance job is
comp
leted.
Retry t
he
operation after
the ma i
ntenance job is
comple
ted.
If
LDEV
formatting, LDEV
shred
ding or
Extent
shred
ding is not
operating,
call t
echnical support.
W
6
8505 58316
Parity groups in C LPR are
being migrated in the
storage system. Please wait
for a while, and then retry
the
operation.
Please wait a while, then
retry the operation.
W
5
8505 58317
CLPR capacity is being
changed in the storage
system. Please wait for a
while, and then retry the
operation.
Please wait a while, then
retry the operation.
W
5
8505 58318
An error occurred on the
DKC, while obtaining
information about the
progress of the CLPR
process. If this problem
persists, please call
technical support.
If this problem persists, call
technical support.
E
3
8505 583 2 3
The C LPR that the parity
groups belong to cannot
be changed because
the
specified parity
groups include only a
part of the Continuous
Specify the parity
group so that the pair
volumes of Continuous
Access Asynchr onous or
TrueCopy Asynchronous
for Mainframe are not
i
5
XP24000 Remote Web Console Error Codes
361