HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
9205 66012
Thesamedefinition exists
in the
spreadsheet file.
(The combination of a
CU
number and an LDEV
number is repeated.)
Check the contents of the
Vol ume Retention Manager
spreadsheet.
E 5
9205 66013
The access attribute set
in the
[Attribute] of the
spreadsheet is incorrect
(an
attribute other than
Read/Write, Read Only, or
Protect is entered).
Enter a correct attribute
in the
[Attribute] of
the spreadsheet (enter
Read/Write, Read Only, or
Protect) .
E 5
9205 68002
This logical volume cannot
be
selected because it is
used as a volume for System
Disk.
Please check the logical
volume configuration, then
retry the operation.
E 5
Table 83 Error Codes — Part Code 9210
Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
9210 7060
An error occurred during
processing. If this problem
persists, please call
technical support.
If this problem persists, call
technical support.
E
2
9210
7442
There is an invalid value
in theVolumeRetention
Manager
information.
If this problem persists, call
technical support.
E
3
9210
7443
The VTOC information
contains one or more invalid
values.
If this problem persists, call
technical support.
E
3
9210 8112
There is no valid volume.
Please mount volumes, then
retry the operation.
W
6
9210 9107
The value that is under setup
is not
reflected yet. Do
you want to continue the
operation?
To continue processing, click
[OK]. To stop processing,
click [Cancel].
i
0
Table 84 Error Codes — Part Code 9605
Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
9605 5013
An error occurred during
SVP processing. If this
problem persists, please call
technical support.
If this problem persists, call
technical support.
E
2
9605 5030
No commands are issued.
Please issue a command
again.
E 5
9605 5041
The number of issued
commands exceeds the
maximum.
Decrease the number of
commands.
W
5
9605
5511
The program product is not
installed.
Please install Program
Product.
W
5
XP24000 Remote Web Console Error Codes
375