HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
0003
2045
The current Cache Residency
Manager
setting cannot be
changed because the
prestaging operation is in
progress. Please wait for
a
while, and then retry the
operation.
Please wait a while, then
retry the operation.
E
6
0003 2080
Prestaging not completed.
Wait a while, and click
[Refresh], then change the
same configuration again.
Or
check the DKC status (if it
is not
blocked). If the same
error occurs, call technical
support.
E
6
0003 2081
An error occurred during
a
VLL operation to add or
delete customized volumes.
Please wait for a while, and
then
retry the operation.
If this pr
oblem
persists, call
technica
lsupport.
To
perfor
maVLLoperation
on an
ext
ernal volume,
check th
e
status of the path
to the
ex
ternal volume.
E
6
0003 2082
Processing is disabled
because the host is mounted
or thedeviceisreserved.
The host is mounted or
thedeviceisreserved.
Please unmount the host
and
cancel reservation of
the device. If the host is an
AIX host, unmount the host,
and
execute the varyoffvg
command.
E
6
0003 2083
The subsystem status is
invalid. Please call technical
support.
Check the DKC status and
the current status of the
configuration setting. If
necessary, re-execute the
setting operation.
E
2
00
03
2084
The subsystem status is
invalid. Please call technical
support.
Check the DKC status and
the current status of the
configuration setting. If
necessary, re-execute the
setting operation.
E
2
0003 2085
Copyingis in progressfor
Continuous Access, Business
Copy, ShadowImage for
Mainframe, Auto LUN, HP
StorageWorks XP for Flash
Copy Mirroring Software or
Cross-system Copy pairs.
Please wait for a while, and
then
retry the operation.
Please wait a while, then
retry .
W
6
0003 2086
The configuration of
Continuous Access, Business
Copy, ShadowImage for
Mainframe, Auto LUN,
Compatible F lashCopy, XP
Snapshot, or Cross-system
Copy has been defined.
Reset the configuration
definition, and then retry the
operation.
Reset the configuration
definition of Continuous
Access, Business Copy,
ShadowImage for
Mainframe, Auto LUN,
Compatible FlashCopy, XP
Snapshot, or Cross-system
Copy, then retry the
operation.
W
6
XP24000 Remote Web Console Error Codes
39