Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)

Fabric OS Command Reference 147
53-1001764-01
configure
22
Portlog Events Enable/Disable Settings
These settings determine whether or not various types of port events are logged.
Each event type displayed on the screen is enabled by default ("on"). When disabled, this event is not
logged by the port log.
Application Attributes
A number of application attributes are configurable. The following table specifies the attributes for
applications that can be modified.
Application Field Type Default Range
_______________________________________________________________
ssl
Certificate File string [not-set] varies
CA Certificate File string [not-set] varies
Length of crypto key number [128] 40,56,128
rpcd
Secure RPCd Callback
Secret string none varies
Webtools
Basic User Enabled boolean no no/yes
Perform License
Checking and Warning boolean yes yes/no
Allow Fabric Event
Collection boolean yes yes/no
Login Session Timeout number 200 60 to
(in seconds) 432000
NOTES The maximum per port login limit is no longer configurable with this command. Use the portcfgNPIVPort
--setloginlimit command to configure this parameter on a per port basis.
The Telnet interface is no longer configurable with this command. Use the ipFilter command to enable or
disable the Telnet interface.
The SNMP attributes are no longer configurable with this command. Use the snmpConfig --set seclevel
command to configure SNMP attributes.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS None
EXAMPLES To enable XISL use on a logical switch with FID 20:
switch:admin> setcontext 20
switch:admin> switchdisable
switch:admin> configure
Configure...
Fabric parameters (yes, y, no, n): [no] y
Domain: (1..239) [1]
Enable a 256 Area Limit
(0 = No,
1 = Zero Based Area Assignment,
2 = Port Based Area Assignment): (0..2) [0] 1
WWN Based persistent PID (yes, y, no, n): [no]
Allow XISL Use (yes, y, no, n): [yes]yes