Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)

Fabric OS Command Reference 215
53-1001764-01
defZone
22
A cfgSave, cfgEnable, or cfgDisable command must be performed subsequent
to the use of this command to commit the changes and distribute them to the
fabric. If a cfgSave is performed and the fabric is already in the No Access default
zone state, a cfgDisable is sent to the fabric. For example:
• defzone --allaccess
• cfgsave
An audit log record is generated for each use of this command.
--show
Displays the current state of the default zone access mode.
EXAMPLES To create a default zone configuration:
primaryfcs:admin> cfgactvshow
Effective configuration:
No Effective configuration
primaryfcs:admin> defzone --noaccess
primaryfcs:admin> cfgsave
primaryfcs:admin> defzone --show
Default Zone Access Mode
committed - No Access
transaction - No Transaction
primaryfcs:admin> cfgactvshow
Effective configuration:
No Effective configuration: (No Access)
SEE ALSO None