Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)

Fabric OS Command Reference 779
53-1001764-01
portShow
22
-stats
Displays global FICON Emulation statistics for the tunnel including FICON
XRC Emulation, FICON Tape Write, FICON Tape Read, FICON Teradata
Write, and FICON Teradata Read statistics.
-fdpb adrs
Displays FICON ports or a specific FICON Device Path Block.
-fchb adrs
Displays FICON logical partitions (LPARs) or a specific FICON Channel
Control Block.
-fcub adrs
Displays FICON images (the same output as with -images) or a specific
FICON Control Unit Block.
-images
Displays FICON images.
-fdcb adrs
Displays FICON devices or specific FICON Device Control Block.
-tapeperf
Displays the emulated tape performance. When issued with -clear, this
command starts the Tape Read and Write Emulation performance monitor.
-xrcperf
Displays the emulated XRC Performance. When issued with -clear, this
command starts the emulated XRC performance monitor.
-structs
Displays FICON control block sizes.
-emul
Displays FICON emulation control block summaries.
-act
Displays the current Active Exchange information.
-teraperf
Displays Teradata Read and Write performance parameters.
options
The following additional option is supported.
-clear
Resets the specified statistics. This operand is optional; it requires a
preceding command.
-mem adrs length
Specifies the SE memory length in words to display. The valid range for length is 0
to 1024.
-dram2
Display the current usage of the dynamic memory allocator.
-pools
Display the current free pool allocation (FPA) buffer usage.
-tcb
Displays tunnel statistics.
-drshow
Displays the current Descriptor Ring status
-smem
Displays the current Shadow Memory data.