Manualshelf

HP StorageWorks Fabric OS 5.x Fabric Watch Administrator Guide (AA-RVJ0B-TE, September 2005)

ManualsBrandsHP ManualsStorageHP StorageWorks Core Switch 2/64
11121314151617181920
Fabric OS 5.x Fabric Watch administrator guide 17
Resource class area
Table 8 describes the Fabric Watch resource class area.
Security class areas
Table 9 lists Fabric Watch areas in the security class and describes what each area indicates. For details
on each area, refer to the
HP StorageWorks Fabric OS 5.x secure fabric administrator guide
.
Receive (RX) Performance The percentage of maximum bandwidth consumed in packet
receipts.
State Changes The state of the port has changed for one of the following reasons:
• The port has gone offline.
• The port has come online.
• The port is testing.
• The port is faulty.
• The port has become an E_Port.
• The port has become an F/FL_Port.
• The port has segmented.
• The port has become a trunk port.
Transmit (TX) Performance The percentage of maximum bandwidth consumed in packet
transmissions.
Table 7 Port class areas (continued)
Area Indicates
Table 8 Resource class area
Area Description
Flash Monitor Monitors the compact flash space available by calculating the
percentage of flash space consumed and comparing it with the
configured high threshold value.
Table 9 Security class areas
Area Indicates
API Violation An API access request reaches a secure switch from an unauthorized
IP address.
DCC Violation An unauthorized device attempts to log in to a secure fabric.
Front Panel Violation A secure switch detects unauthorized front panel access.
HTTP Violation A browser access request reaches a secure switch from an
unauthorized IP address.
Illegal Command Commands permitted only to the primary Fibre Channel Switch (FCS)
are executed on another switch.
Incompatible DB Secure switches with different version stamps have been detected.
Invalid Certificates The primary FCS sends a certificate to all switches in the secure fabric
before it sends configuration data. Receiving switches accept only
packets with the correct certificate; any other certificates are invalid
and represent an attempted security breach.