HP StorageWorks Fabric OS 5.x Fabric Watch Administrator Guide (AA-RVJ0B-TE, September 2005)

36 Configuring Fabric Watch
Fabric Watch redraws the element table with the selected element disabled. The second row of information
about the selected element does not appear any more, and the status of the element is set to disabled, as
follows:
Figure 9 Disabling a threshold
3. enable a threshold
To start monitoring a selected element, use the enable a threshold option as follows:
1. Enter 3 at the command prompt.
The system generates output similar to the following screen. The output you see varies based on the class
and area you selected.
The numerical values shown in between the brackets (in this case, 8-29) correspond to the index numbers
of the elements within the area. The first element is always selected by default.
2. Enter the index number of the element for which Fabric Watch should enable monitoring.
Fabric Watch redraws the element table with the selected element enabled. A second row of information
about the selected element appears, and the status of the element is set to enabled.
Select threshold index => : (8..29) [8] 8
Index ThresholdName Port CurVal Status
LastEvent LasteventTime LastVal LastState
================================================================================
8 eportRXPerf008 8 0 Percentage(%)/min disabled
inBetween Wed Aug 25 01:01:05 2004 0 Percentage(%)/min Informative
17 eportRXPerf017 17 0 Percentage(%)/min enabled
inBetween Wed Aug 25 01:01:05 2004 0 Percentage(%)/min Informative
26 eportRXPerf026 26 0 Percentage(%)/min enabled
inBetween Wed Aug 25 01:01:11 2004 0 Percentage(%)/min Informative
27 eportRXPerf027 27 0 Percentage(%)/min enabled
inBetween Wed Aug 25 01:01:11 2004 0 Percentage(%)/min Informative
28 eportRXPerf028 28 0 Percentage(%)/min enabled
inBetween Wed Aug 25 01:01:11 2004 0 Percentage(%)/min Informative
29 eportRXPerf029 29 0 Percentage(%)/min enabled
inBetween Wed Aug 25 01:01:11 2004 0 Percentage(%)/min Informative
1 : refresh
2 : disable a threshold
3 : enable a threshold
4 : advanced configuration
5 : return to previous page
Select choice => : (1..5) 3
Select threshold index => : (8..29) [8] 8
Index ThresholdName Port CurVal Status
LastEvent LasteventTime LastVal LastState
================================================================================
8 eportRXPerf008 8 0 Percentage(%)/min enabled
inBetween Wed Aug 25 01:01:05 2004 0 Percentage(%)/min Informative
17 eportRXPerf017 7 0 Percentage(%)/min enabled
inBetween Wed Aug 25 01:01:05 2004 0 Percentage(%)/min Informative
26 eportRXPerf026 26 0 Percentage(%)/min enabled
inBetween Wed Aug 25 01:01:11 2004 0 Percentage(%)/min Informative
27 eportRXPerf027 27 0 Percentage(%)/min enabled
inBetween Wed Aug 25 01:01:11 2004 0 Percentage(%)/min Informative
28 eportRXPerf028 28 0 Percentage(%)/min enabled
inBetween Wed Aug 25 01:01:11 2004 0 Percentage(%)/min Informative
29 eportRXPerf029 29 0 Percentage(%)/min enabled
inBetween Wed Aug 25 01:01:11 2004 0 Percentage(%)/min Informative