HP StorageWorks Fabric OS 5.x Fabric Watch Administrator Guide (AA-RVJ0B-TE, September 2005)

40 Configuring Fabric Watch

the value, it does not take effect.

NOTE: To ensure that your threshold setting configuration takes effect, remember to apply the threshold

boundary changes, and then change the threshold boundary level to Custom.

Table 14 describes the event behavior of each element in the Threshold Boundary menu.

Table 14 Element listing information - threshold boundary menu

See ”Fabric watch components” on page 19 for more details about the event setting table and notification

methods for each of the possible event settings.

For details about advanced configuration menu options, see Table 15.

1 : change behavior type 11 : change threshold alarm level

2 : change behavior interval 12 : change changed alarm

3 : change threshold boundary level 13 : change below alarm

4 : change custom unit 14 : change above alarm

5 : change custom time base 15 : change inBetween alarm

6 : change custom low 16 : apply threshold alarm changes

7 : change custom high 17 : cancel threshold alarm changes

8 : change custom buffer 18 : return to previous page

9 : apply threshold boundary changes

10 : cancel threshold boundary changes

Select choice => : (1..18) [18] 3

1 : Default

2 : custom

Enter boundary level type => : (1..2) [1] 2

Index ThresholdName BehaviorType BehaviorInt

8 eportRXPerf008 Triggered 1

17 eportRXPerf017 Triggered 1

26 eportRXPerf026 Triggered 1

27 eportRXPerf027 Triggered 1

28 eportRXPerf028 Triggered 1

29 eportRXPerf029 Triggered 1

Threshold boundary level is set at : Custom