HP StorageWorks Fabric OS 5.x Fabric Watch Administrator Guide (AA-RVJ0B-TE, September 2005)

Fabric OS 5.x Fabric Watch administrator guide 53

Figure 17 Configuring SNMP management host IP address

4. Enter the IP address for the switch in the Host field. Enter the community string in the Community field.

To perform set operations, enter the write community into the Write Community field.

5. Expand the tree on the left to find the Fabric Watch OID information. To find the OID, use the following

hierarchy: SW-MIB, bcsi, commDev, fibrechannel, fcSwitch, sw, swFwSystem.

swd77:admin> agtcfgset

Customizing MIB-II system variables ...

At each prompt, do one of the following:

o <Return> to accept current value,

o enter the appropriate new value,

o <Control-D> to skip the rest of configuration, or

o <Control-C> to cancel any change.

To correct any input mistake:

<Backspace> erases the previous character,

<Control-U> erases the whole line,

sysDescr: [Fibre Channel Switch.]

sysLocation: [End User Premise.]

sysContact: [Field Support.]

authTrapsEnabled (true, t, false, f): [false]

SNMP community and trap recipient configuration:

Community (rw): [Secret C0de]

Trap Recipient's IP address in dot notation: [0.0.0.0]

Community (rw): [OrigEquipMfr]

Trap Recipient's IP address in dot notation: [0.0.0.0]

Community (rw): [private]

Trap Recipient's IP address in dot notation: [0.0.0.0]

Community (ro): [public]

Trap Recipient's IP address in dot notation: [0.0.0.0] 192.168.2.2

Trap recipient Severity level : (0..5) [0]

Community (ro): [common]

Trap Recipient's IP address in dot notation: [0.0.0.0]

Community (ro): [FibreChannel]

Trap Recipient's IP address in dot notation: [0.0.0.0]

SNMP access list configuration: