HP StorageWorks HSG80 ACS Solution Software V8.8 for IBM AIX Installation and Configuration Guide (AA-RV1HA-TE, March 2005)

Preparing the Host System

112 HSG80 ACS Solution Software V8.8 for IBM AIX Installation and Configuration Guide

You are now presented with the choice to install the SWCC Agent package. The

SWCC Agent is a monitoring utility that provides email and error log notification

if there is an error on a monitored RAID array. The SWCC Agent also allows the

SWCC Client to monitor and configure HSG80 RAID Arrays. The SWCC Agent

does not have to be installed but it is recommended. The Agent fileset is called

swcc.rte.

SWCC Agent Package

--------------------------

Would you like to install/upgrade the SWCC Agent Now (Y/n)? Y

Installing Agent Package...OK

The next part of the installation script allows you to configure Client systems that

connect to the SWCC Agent, RAID subsystems that are monitored, and email

addresses that are notified in the event of a subsystem error. The configuration can

be done here or at a later date using the

/usr/stgwks2/config.sh script or SMIT

(Applications->Compaq SWCC Agent Configuration).

Would you like to configure the agent now (y/N)? y

The software contained on this media is proprietary to and

embodies the confidential technology of Compaq Computer

Corporation. Possession, use, duplication or dissemination of

the software and media is authorized only pursuant to a valid

written license from Compaq Computer Corporation.

RESTRICTED RIGHTS LEGEND Use, duplication, or disclosure by

the U.S. Government is subject to restrictions as set forth in

Subparagraph (c)(1)(ii) of DFARS 252.227-7013, or in FAR

52.227-19, as applicable.

Enterprise Storage Management (steam)

Agent Configuration Script

You must be root to use this script!

Current user is root.

Do you wish to continue? [Y,n]: