HP StorageWorks HSG80 ACS Solution Software V8.8 for IBM AIX Installation and Configuration Guide (AA-RV1HA-TE, March 2005)

Preparing the Host System
120 HSG80 ACS Solution Software V8.8 for IBM AIX Installation and Configuration Guide
Removing the Solution Software
To uninstall the solution software:
1. Stop all processes accessing any HSG80 or HSG60 devices.
2. Remove any volume groups on any HSG80 or HSG60 devices.
3. Issue the
cpq_hsg_uninstall command or run the UNINSTALL program
from the AIX installation kit. The following is the output from the
cpq_hsg_uninstall command or UNINSTALL program.
# cpq_hsg_uninstall
This script will uninstall the following filesets:
hsg_snapshot.rte: create disk snapshots
swcc.rte: SWCC agent
hsg80.rte: HSG80 device support
hsg60.rte: HSG60 devices support
PC1000.driver.obj (optional): Cambex adapter driver
Before you execute this uninstall, be sure that any volume
groups that are attached to any HSG80/HSG60 disks are removed!
Do you want to proceed with uninstalling these filesets (Y/n)?
Removing hsg_snapshot.rte...OK
Removing swcc.rte...OK
Removing HSG80 devices...OK
Removing hsg80.rte...OK
Removing HSG60 devices...OK
Removing hsg60.rte...OK
Note: If you are using any other storage, such as the Enterprise Virtual Array, you
should not uninstall the Cambex adapter driver.
Do you want to uninstall the Cambex driver (Y/n)?
Removing Cambex adapters...OK
Removing Cambex adapter driver...OK
Uninstall Complete.