HP StorageWorks HSG80 ACS Solution Software V8.8 for IBM AIX Installation and Configuration Guide (AA-RV1HA-TE, March 2005)

FC Configuration Procedures
164 HSG80 ACS Solution Software V8.8 for IBM AIX Installation and Configuration Guide
Verifying Storage Configuration from Host
Once the HP StorageWorks Solution Software has been installed, logical units
may be created on the RAID Array and configured. Create these logical units
using the Client or the CLI. Be sure the Agent and Client are already installed on
the AIX and Windows systems, respectively.
New logical units created on the RAID Array must be recognized by the operating
system before they can be used. The following steps outline the process:
1. Using the CLI or the Client, create the logical units on the RAID Array.
2. As the superuser (root), run the command on the host:
# cfgmgr -v
3. Verify that the host has located and configured the new RAID Array devices
in the operating system using the command:
# lshsg
The output of the command looks like:
hdisk1 Available X0-06-01-0,0 DEC HSG80 Command Console LUN
hdisk2 Available X0-06-01-0,1 DEC HSG80 RAID Array
hdisk3 Available X0-06-01-0,2 DEC HSG80 RAID Array
hdisk4 Available X0-06-01-0,3 DEC HSG80 RAID Array
hdisk5 Available X0-06-01-0,4 DEC HSG80 RAID Array
hdisk6 Available X0-06-01-0,5 DEC HSG80 RAID Array
hdisk7 Available X0-06-01-0,6 DEC HSG80 RAID Array
hdisk8 Available X0-06-01-0,7 DEC HSG80 RAID Array
hdisk9 Available X0-06-01-2,2 DEC HSG80 RAID Array
hdisk10 Available X0-06-01-2,4 DEC HSG80 RAID Array
hdisk11 Available X0-06-01-4,4 DEC HSG80 RAID Array
hdisk12 Available X0-06-01-5,1 DEC HSG80 RAID Array
You should have an entry of type:
hdisknn Available X0-06-01-2,4 DEC HSG80 RAID Array
for each logical unit that you have created on the RAID Array.
4. If the devices were not recognized, recheck the status of the RAID controller,
logical units, and cable connections.
You can now use the System Management Interface Tool (SMIT), to make
volume groups, logical volumes and file systems using these logical units.