Manualshelf

Brocade Web Tools Administrator's Guide - Supporting Fabric OS v7.0.0 (53-1002152-01, March 2012)

ManualsBrandsHP ManualsComputer AccessoriesHP StorageWorks DC Backbone Switch FIPS Compliant Encryption Blade Option
171172173174175176177178179180
Web Tools Adminstrator’s Guide 151
53-1002152-01
Configuring the backbone fabric ID
11
NOTE
When the Virtual Fabrics capability is enabled on the switch, Fabric ID cannot be set using the Set
Fabric ID button.
To configure the backbone fabric ID, perform the following steps.
1. Open the Switch View window.
2. Select FCR in the Manage section of the Tasks menu.
3. Select the EX-Ports tab.
4. Select all the EX_Ports in the table, and click Disable.
5. Select the General tab.
6. Click Set Fabric ID in the task bar.
The Configure Backbone Fabric ID window displays.
7. Select a fabric ID from the drop-down menu.
NOTE
The fabric ID is a number from 1 through 128. Web Tools warns you if you select a fabric ID
that is already in use.
8. Click OK.
9. Click Enable FCR in the task bar.
10. Select all the EX_Ports in the table, and click Enable.