Fabric OS Message Reference v6.4.0 (53-1001767-01, June 2010)

Fabric OS Message Reference 127
53-1001767-01
CVLC-1015
19
Recommended
Action
Use cryptocfg command to add the key ID, if available.
Severity ERROR
CVLC-1015
Message <timestamp>, [CVLC-1015], <sequence-number>,, ERROR, <system-name>, LUN is set to
read only mode. Reason: <Reason for LUN is set to read only mode>.\nContainer:
<Target container name>, Initiator: <Initiator physical WWN>, LUN ID: <LUN ID>.
Probable Cause Indicates that the LUN is set as read-only because there is a conflict in the configuration.
Recommended
Action
No action is required.
Severity INFO
CVLC-1016
Message <timestamp>, [CVLC-1016], <sequence-number>,, INFO, <system-name>, LUN is out of
read only mode. Reason: <Reason for LUN is out of read only mode>.\nContainer:
<Target container name>, Initiator: <Initiator physical WWN>, LUN ID: <LUN ID>.
Probable Cause Indicates that the LUN is set back to read/write.
Recommended
Action
No action is required.
Severity INFO
CVLC-1017
Message <timestamp>, [CVLC-1017], <sequence-number>,, INFO, <system-name>, Event:
<Description of the event>.\nContainer: <Target container name>, Initiator:
<Initiator physical WWN>, LUN ID: <LUN ID>.
Probable Cause Indicates a warning or an error event.
Recommended
Action
No action is required.
Severity INFO
CVLC-1018
Message <timestamp>, [CVLC-1018], <sequence-number>,, INFO, <system-name>, Event:
<Description of the event>.\nContainer: <Target container name>, Initiator:
<Initiator physical WWN>, LUN ID: <LUN ID>.