Fabric OS Message Reference v6.4.0 (53-1001767-01, June 2010)

Table Of Contents
Fabric OS Message Reference 245
53-1001767-01
FICN-1021
35
FICN-1021
Message <timestamp>, [FICN-1021], <sequence-number>,, ERROR, <system-name>,
DevTapeEgr:FICON Tape Cancel:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain>8X<DevicePort LPAR CUADDR DeviceAddr>8X Elapsed Time=<the current
SIO time in seconds for the device>.<the current SIO time in milliseconds for the
device> seconds.
Probable Cause Indicates the FICON channel issued a Cancel sequence for a device in emulation.
Recommended
Action
If there was an unexpected job failure associated with this event, contact your vendor's customer
support for assistance.
Severity ERROR
FICN-1022
Message <timestamp>, [FICN-1022], <sequence-number>,, ERROR, <system-name>,
DevTapeEgr:FICON Selective Reset:Path=<VEPortNumber HostDomain HostPort
DeviceDomain> <DevicePort LPAR CUADDR DeviceAddr> State=0x<the current state of
the device that received the selective reset> statArray=0x<the last 4 status
values received from the device> cmdArray=0x<the last 4 commands that were issued
to the device> tflags=0x<the current emulation tape control flags for the device>
sflags=0x<the current emulation status control flags for the device>.
Probable Cause Indicates the FICON channel issued a Selective Reset for a device that was active in emulation.
Recommended
Action
If there was an unexpected job failure associated with this event, contact your vendor's customer
support for assistance.
Severity ERROR
FICN-1023
Message <timestamp>, [FICN-1023], <sequence-number>,, ERROR, <system-name>,
DevTapeEgr:FICON Selective Reset:Path=<VEPortNumber HostDomain HostPort
DeviceDomain> <DevicePort LPAR CUADDR DeviceAddr> Elapsed Time=<the current SIO
time in seconds for the device>.<the current SIO time in milliseconds for the
device> seconds.
Probable Cause Indicates the FICON channel issued a Selective Reset sequence for a device.
Recommended
Action
If there was an unexpected job failure associated with this event, contact your vendor's customer
support for assistance.
Severity ERROR