Fabric OS Message Reference v6.4.0 (53-1001767-01, June 2010)

Fabric OS Message Reference 281
53-1001767-01
Chapter
40
FSS System Messages
FSS-1001
Message <timestamp>, [FSS-1001], <sequence-number>, SLOT cp-slot-number | CHASSIS,
WARNING, <system-name>, Component (<component name>) dropping HA data update
(<update ID>).
Probable Cause Indicates that an application has dropped a high availability (HA) data update.
Recommended
Action
Run the haSyncStart command if this is a dual-CP system, or reboot the switch if it is a nonbladed
system.
If the message persists, run the supportFtp (as needed) to set up automatic FTP transfers; then run
the supportSave command and contact your switch service provider.
Severity WARNING
FSS-1002
Message <timestamp>, [FSS-1002], <sequence-number>, SLOT cp-slot-number | CHASSIS,
WARNING, <system-name>, Component (<component name>) sending too many concurrent
HA data update transactions (<dropped update transaction ID>)
Probable Cause Indicates that an application has sent too many concurrent high availability (HA) data updates.
Recommended
Action
Run the haSyncStart command if this is a dual-CP system, or reboot the switch if it is a nonbladed
system.
If the message persists, run the supportFtp (as needed) to set up automatic FTP transfers; then run
the supportSave command and contact your switch service provider.
Severity WARNING
FSS-1003
Message <timestamp>, [FSS-1003], <sequence-number>, SLOT cp-slot-number | CHASSIS,
WARNING, <system-name>, Component (<component name>) misused the update
transaction (<transaction ID>) without marking the transaction beginning.
Probable Cause Indicates that the Fabric OS state synchronization (FSS) service has dropped the update because
an application has not set the transaction flag correctly.
Recommended
Action
Run the haSyncStart command if this is a dual-CP system, or reboot the switch if it is a nonbladed
system.