Fabric OS Message Reference v6.4.0 (53-1001767-01, June 2010)

286 Fabric OS Message Reference
53-1001767-01
FSSM-1004
41
Probable Cause Indicates that the active control processor (CP) and the standby CP in a dual CP system are running
firmware that are incompatible with each other. If the active CP fails, the failover will be disruptive.
In a switch system, this message is logged when a firmware upgrade or downgrade was invoked.
The new firmware version is not compatiable with the current running version. This causes a
disruptive firmware upgrade or downgrade.
Recommended
Action
For a dual CP system, run the firmwareDownload command to load compatible firmware on the
standby CP. For details on this command, refer to the Fabric OS Command Reference Manual.
Severity INFO