Fabric OS Message Reference v6.4.0 (53-1001767-01, June 2010)

356 Fabric OS Message Reference
53-1001767-01
FW-1535
42
FW-1535
Message <timestamp>, [FW-1535], <sequence-number>,, INFO, <system-name>, Fabric Watch has
stopped portfencing feature for <Area String> loss area in <Port Name> class since
FOS6.3. Disabling port fencing feature for this.
Probable Cause Indicates that in previous versions portfencing is configured for Link/Sync loss, but after upgrading
to new version, in which portfencing is not suppoted, resets the above bit.
Recommended
Action
No action is required. You are informed that PF bit is reset.
Severity INFO
FW-3010
Message <timestamp>, [FW-3010], <sequence-number>,, INFO, <system-name>, <Port
Name>,<Label> value has changed(High=<High value>, Low=<Low value>). Current
value is <Value> <Unit>.
Probable Cause Indicates that the circuit utilization has changed.
Recommended
Action
Respond to this message as it is appropriate to the particular policy of the end-user installation.
Severity INFO
FW-3011
Message <timestamp>, [FW-3011], <sequence-number>,, INFO, <system-name>, <Port
Name>,<Label> is below low boundary(High=<High value>, Low=<Low value>). Current
value is <Value> <Unit>.
Probable Cause Indicates that the circuit utilization is below threshold.
Recommended
Action
No action is required.
Severity INFO
FW-3012
Message <timestamp>, [FW-3012], <sequence-number>,, WARNING, <system-name>, <Port
Name>,<Label> is above high boundary(High=<High value>, Low=<Low value>). Current
value is <Value> <Unit>.
Probable Cause Indicates that the circuit utilization is above threshold.