Fabric OS Message Reference v6.4.0 (53-1001767-01, June 2010)

430 Fabric OS Message Reference
53-1001767-01
MFIC-1003
66
Recommended
Action
IDID mode is a fabric-wide mode; make sure that any switches added to the fabric are configured
with the same IDID mode as the fabric. If you are enabling or disabling IDID mode, this message is
for information purposes only, and no action is required.
IDID mode can be set using the configure command in the CLI or checking the Advanced Web Tools
Switch Admin > Configure Tab > Fabric Subtab > Insistent Domain ID Mode check box. The switch
must be disabled to change the IDID mode.
Severity WARNING