Fabric OS Message Reference v6.4.0 (53-1001767-01, June 2010)

Fabric OS Message Reference 541
53-1001767-01
SEC-1182
90
Recommended
Action
No action is required.
Severity INFO
SEC-1182
Message <timestamp>, [SEC-1182], <sequence-number>,, INFO, <system-name>, Recovered
<number of> accounts.
Probable Cause Indicates the specified number of accounts has been recovered from backup.
Recommended
Action
No action is required.
Severity INFO
SEC-1183
Message <timestamp>, [SEC-1183], <sequence-number>,, ERROR, <system-name>, Policy to
binary conversion error: Port
<port number> is out range.
Probable Cause Indicates a security database conversion has failed because of an invalid value.
Recommended
Action
Retry the command with a valid value.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity ERROR
SEC-1184
Message <timestamp>, [SEC-1184], <sequence-number>,, INFO, <system-name>, <server>
configuration change, action <action>, server ID <server>.
Probable Cause Indicates the specified action is applied to the specified Remote Authentication Dial-in User Service
(RADIUS) / Lightweight Directory Access Protocol (LDAP) server configuration. The possible actions
are ADD, REMOVE, CHANGE, and MOVE
Recommended
Action
No action is required.
Severity INFO
SEC-1185
Message <timestamp>, [SEC-1185], <sequence-number>,, INFO, <system-name>, <action>
switch DB.