director 2/64 installation guide

3–2 director 2/64 installation guide
Using EWS to Configure the Director 2/64
3. At the browser, enter the director IP address in the Uniform Resource Locator
(URL) field. The Enter Network Password dialog box displays, as shown in
Figure 3–1.
4. Type the default user name and password, or the user name and password
assigned by the administrator.
NOTE: The default user name is Administrator and the default password is password. The
user name and password are case sensitive.
5. Click OK. EWS opens showing the View page, as shown in Figure 3–2.
Figure 3–1: Enter Network Password dialog box