director 2/64 installation guide

director 2/64 installation guide 3–7
Using EWS to Configure the Director 2/64
Configure Operating Parameters
Use this procedure to configure the following operating parameters:
• BB_Credit
•R_A_TOV
•E_D_TOV
• Preferred Domain ID
• Interop Mode
• Switch Priority
• Rerouting Delay
First, set the director offline as follows.
1. At the View page, select the Operations option at the left side of the panel. The
Operations page opens with the Port Beaconing page displayed.
2. At the Operations page, click the Online State tab. The Current State page
displays, as shown in Figure 3–6.
Figure 3–6: Current State page
3. Click Set Offline. The message “Your operations changes have
been successfully activated” displays.