director 2/64 installation guide

3–20 director 2/64 installation guide
Using EWS to Configure the Director 2/64
3. For the Operator set of data fields:
a. Type the operator user name (as specified by the customer’s network
administrator) in the New User Name field. Use 16 or fewer alphanumeric
characters.
b. Type the operator password (as specified by the customer’s network
administrator) in the New Password field. Use 16 or fewer alphanumeric
characters.
c. Type the operator password again in the Confirm New Password field.
4. Click Activate to save the information. The message “Your changes to
the user rights configuration have been successfully
activated” displays.
5. Choose File > Close. The Windows desktop displays.