director 2/64 installation guide

director 2/64 installation guide 4–1
4
Manage Firmware Versions
The Director 2/64 internal operating code is downloaded from the HAFM server and
stored on a CTP2 card. Up to eight versions can be stored on the HAFM server hard
drive and made available for download to a director. This chapter contains information
on the following firmware management tasks:
• Determine a Director Firmware Version, page 4–1
• Add a Firmware Version, page 4–2
• Modify a Firmware Version Description, page 4–4
• Delete a Firmware Version, page 4–5
• Download a Firmware Version to a Director, page 4–5
• Back Up the director’s Configuration, page 4–8
Determine a Director Firmware Version
Use these steps to determine the Director 2/64 firmware version:
1. At the HAFM server, open the HAFM application. The Products View page
displays.
2. Double-click the icon representing the director to be inspected for firmware
version. The Hardware View page for the selected director displays.
3. Choose Maintenance > Firmware Library. The Director Firmware Library
dialog box displays, as shown in Figure 4–1.