director 2/64 installation guide

4–2 director 2/64 installation guide
Manage Firmware Versions
Figure 4–1: Firmware Library dialog box
4. The firmware version displays at the lower left corner of the dialog box in
XX.YY.ZZ format, where:
• XX is the version level
• YY is the release level
• ZZ is the patch level
5. Click Close.
Add a Firmware Version
The firmware version shipped with the director is provided on the Director 2/64
documentation CD. Subsequent firmware versions to upgrade the director are
provided to customers through the Hewlett-Packard website.
NOTE: When adding a firmware version, follow procedural information in the release notes that
accompany the firmware version. This information supplements information provided in this
general procedure.
Use these steps to add a director firmware version to the library stored on the HAFM
server hard drive:
1. Obtain the new firmware version from the Hewlett-Packard website:
NOTE: The following path is subject to change.
a. At the HAFM server or other personal computer (PC) with Internet access,
open the Hewlett-Packard website. The uniform resource locator (URL) is
http://thenew.hp.com/country/us/eng/support.html
.
b. Click on Firmware Downloads in left panel.
c. Click the Director Firmware Version XX.YY.ZZ entry, where XX.YY.ZZ is
the desired version. The Windows Save As dialog box displays.