director 2/64 installation guide

director 2/64 installation guide 4–5

Manage Firmware Versions

5. Enter a modified description (up to 24 characters in length) for the firmware

version and click OK. It is recommended the description include the installation

date and text that uniquely identifies the firmware version.

6. The new description for the firmware version displays in the Director Firmware

Library dialog box.

7. Click Close.

Delete a Firmware Version

Use these steps to delete a firmware version from the library stored on the HAFM

server hard drive:

1. At the HAFM server, open the HAFM application. The Products View page

displays.

2. Double-click the icon representing the director from which the firmware version

will be deleted. The Hardware View page for the selected director displays.

3. Choose Maintenance > Firmware Library. The Director Firmware Library

dialog box displays, as shown in Figure 4–1.

4. Select the firmware version to be deleted and click Delete. A confirmation dialog

box displays.

5. Click OK. The selected firmware version is deleted from the Director Firmware

Library dialog box.

6. Click Close.

Download a Firmware Version to a Director

This procedure downloads a selected firmware version from the HAFM server library

to a director managed by the open instance of the Product Manager application. The

procedure applies to a director with two (redundant) CTP2 cards. The process occurs

concurrently without taking the director offline or disrupting operation. The new

firmware version takes effect when control is passed from the active to the backup

CTP2 card. Although director operation is not affected, name server, alias server, and

Although traffic is not disrupted, the green port LEDs will flicker or blink during the

IPL portion of this operation as control is passed to the other CTP2 card.