director 2/64 installation guide

director 2/64 installation guide 1–7
Overview
Hardware Components
The director provides a modular design that enables quick removal and replacement of
FRUs. The following sections define Director 2/64 main components.
Front View
Figure 1–1 shows Director 2/64 components accessible from the front of the director.
Component descriptions follow the figure.
Figure 1–1: Director components—front
CTP2 Card
The Director 2/64 ships with two Control Processor (CTP2) cards. The active CTP2
card initializes and configures the director after power on, and contains the
microprocessor and associated logic that coordinate director operation. The second
1 Power and system error LEDs
2 UPM cards
3 Power supplies
4 Cable management assembly
1
5 Front bezel
6 CTP2 cards
1. Provided in rack mount kits 9000/10000/11000 and M-Series only.