director 2/64 installation guide

2–6 director 2/64 installation guide
Installing and Configuring the Director 2/64
Table 2–1: Shipping Carton Contents for an HP 9000/10000/11000 Rack
Number Item
1 One HP StorageWorks Director 2/64 Product CD containing firmware,
license, documentation
2 hp StorageWorks director 2/64 installation guide
3 Two Power Distribution Unit (PDU) power cords
4 Two standard AC power cords
5 Four multimode, short-wave loopback plugs
6 One torque driver with integrated 5/32” bit
7 One 10-foot null modem cable
8 HP 9000/10000/11000 Rack Mounting Kit containing:
• Two front mounting brackets
• Two rear mounting plates
• Two rear angle brackets
9 Two shelf brackets
- Pouch containing HP 9000/10000/11000 rack mounting hardware:
• Eight 10-32 x 0.375 in Phillips panhead screws—Installs two shelf
brackets to rails.
• Six 10-32 x 0.375 in Phillips panhead screws—Installs two front
mounting brackets to rails.
• Four 10-32 X 0.25 in Phillips countersunk screws—Installs front
brackets to switch.
• Ten 10-32 cage nuts—Secures front and rear shelf brackets.
• Four 0-32 x 0.375 in Phillips panhead screws—Installs rear bracket
sections.
• Four 10-32 X 0.25 in Phillips countersunk screws—Installs rear
mounting plates to chassis.
• Four 10-32 X 0.375 in Phillips panhead screws—Installs two rear
angle brackets.
• Eight square alignment washers
q One cable management assembly
w HP StorageWorks Director 2/64