director 2/64 installation guide

2–18 director 2/64 installation guide
Installing and Configuring the Director 2/64
3. Locate the rail tray and two rail tray brackets in the shipping carton.
Figure 2–9: Rail tray mounting location requirement
4. Position and attach both rear brackets, as shown in Figure 2–10:
a. Locate the lowest U of the 9Us chosen for mounting the switch (the lowest
being U1).
b. Attach each rear rail tray bracket to the rear rack uprights at U1 (one on the
left and one on the right.
c. Secure each rail tray bracket using one M5 Torx screw.