director 2/64 installation guide

director 2/64 installation guide 2–19
Installing and Configuring the Director 2/64
Figure 2–10: Attaching a rear rail tray bracket
5. Install a Tinnerman nut in the top holes of U1 for both the left and right rack-front
uprights, as shown in Figure 2–11.
Figure 2–11: Installing a Tinnerman nut on the rack-front rail in U1
1 Rear tray bracket
2 M5 screw with
attached lock washer
3 HP rack
1 Tinnerman nut
2 Outer surface of HP
rack
2
3
1
1
2