Manualshelf

director 2/64 installation guide

ManualsBrandsHP ManualsStorageHP StorageWorks Director 2/64 base 32 port config
61626364656667686970
director 2/64 installation guide 2–33
Installing and Configuring the Director 2/64
Figure 2–22: Connecting the null modem cable between the director and a
workstation
2. Connect the 9-pin end of the RS-232 modem cable to the maintenance port.
3. Connect the other cable end to a 9-pin communication port (COM1 or COM2) at
the rear of the local workstation.
1 Maintenance port
2 RS-232 port
3 Null Modem cable