director 2/64 installation guide

2–40 director 2/64 installation guide
Installing and Configuring the Director 2/64
Figure 2–27: Hardware View page (with FRU failures)
Set Director Date and Time
The Director 2/64 Product Manager log entries are stamped with the date and time
received from the director. Use these steps to set the effective date and time for the
director.
NOTE: The director and HAFM synchronize at least once daily.
1. At the Hardware View page for the selected director, click the Configure menu.
2. Choose Date/Time from the drop-down menu. The Configure Date and Time
dialog box displays, as shown in Figure 2–28.