director 2/64 installation guide

2–56 director 2/64 installation guide
Installing and Configuring the Director 2/64
NOTE: These procedural steps are valid only for an initial installation. Several dialog boxes
appearing in this procedure are configured only once per installation.
To configure the call-home feature, complete the following instructions for
Windows 2000:
1. Ensure an analog telephone cable is routed and connected to the modem.
2. Log on to Windows 2000 as Administrator, and then double-click the Call-Home
Setup icon that displays on the Windows desktop to begin the configuration. If
this is the first time call-home setup is attempted, the Network Connection
Wizard dialog box displays.
Figure 2–35: Type of Connection window
3. Choose Dial-up to private network option, and then click Next.