director 2/64 installation guide

director 2/64 installation guide 2–63
Installing and Configuring the Director 2/64
— The maximum cumulative time that the throughput percentage threshold can
be exceeded during the set time interval before an alert is generated.
• Ports for which you are configuring threshold alerts.
You can configure up to 16 alerts, and any number of alerts can be active at one time.
Use the following procedures to create a new threshold alert, or to modify, activate,
deactivate, or delete an alert.
Create New Alerts
1. At the Hardware View page, choose Configure > Threshold Alerts. The
Configure Threshold Alerts dialog box displays, as shown in Figure 2–40.
NOTE: If alerts are configured, they will display in table format showing the name of the
alert, type of alert (Rx, Tx, or Rx or Tx), and alert state (inactive or active).
Figure 2–40: Configure Threshold Alerts dialog box