director 2/64 installation guide

director 2/64 installation guide 2–65
Installing and Configuring the Director 2/64
5. Click Next. A new screen displays with additional parameters. The name
configured for the alert displays at the top of the screen.
NOTE: Click Previous if you need to return to the previous screen.
Figure 2–42: New Threshold Alerts dialog box—second screen
6. Enter a percentage from 1 through 100 for % utilization. When throughput
reaches this percentage of port capacity, a threshold alert will occur.
7. Enter the amount of cumulative minutes in which the % utilization should exist
during the notification interval before an alert is generated. You can also choose
At any time if you want an alert to occur whenever the set % utilization is
reached. The valid range is from 1 to the interval value set in step 8.
8. Enter the interval in minutes in which throughput is measured and threshold
notifications can occur. The valid range is 5 minutes to 70,560 minutes.