director 2/64 service manual

2–64 director 2/64 service manual
Diagnostics
22
Define the director’s correct IP address to the HAFM server.
1. At the Products View, right-click the icon with the gray square representing the
director reporting the problem. A menu displays.
2. Choose Modify. The Modify Network Address dialog box (Figure 2–11)
displays.
Figure 2–11: Modify Network Address dialog box
3. Type the correct IP address and click OK.
Did the IP address below the director icon change to the new entry and did the
Ethernet connection recover?
NO YES
↓ The director-to-HAFM server connection is restored and is operational. Exit
MAP.
Contact the next level of support. Exit MAP.
23
An incorrect product type is defined to the HAFM server.
1. At the Products View, right-click the icon with the gray square representing the
product reporting the problem. A menu displays.
2. Choose Delete. A Warning dialog box displays asking if the product is to be
deleted.
3. Click Yes to delete the product.
4. At the Products View, click Configure and choose New Product. The New
Product dialog box (Figure 2–12) displays.