director 2/64 service manual

director 2/64 service manual 2–69
Diagnostics
3
Is fault isolation being performed at the director?
YES NO
↓ Fault isolation is being performed at the HAFM server or Embedded Web
Server interface. Go to step 10.
420 Backup CTP2 card NV-RAM failure. Go to step 7.
433 Non-recoverable Ethernet fault. Go to step 7.
440 Embedded port hardware failed. Go to step 7.
604 SBAR assembly failure. Go to step 9.
605 SBAR assembly revision not supported. Go to step 16.
607 Director contains no operational SBAR
assemblies.
Go to step 9.
805 High temperature warning (SBAR assembly
thermal sensor).
Go to step 9.
806 Critically hot temperature warning (SBAR
assembly thermal sensor).
Go to step 9.
807 SBAR assembly shutdown due to thermal
violation.
Go to step 9.
810 High temperature warning (CTP2 card thermal
sensor).
Go to step 7.
811 Critically hot temperature warning (CTP2 card
thermal sensor).
Go to step 7.
812 CTP2 card shutdown due to thermal violation. Go to step 7.
850 System shutdown due to CTP2 card thermal
violations.
Go to step 7.
Table 2–9: MAP 500: Event Codes (Continued)
Event
Code Explanation Action