director 2/64 service manual

2–84 director 2/64 service manual
Diagnostics
18
The port has an invalid attachment. The information in the Port Properties dialog box
specifies the reason (Table 2–12).
19
The port connection conflicts with the configured port type. Either an expansion port
(E_Port) is incorrectly cabled to a Fibre Channel device or a fabric port (F_Port) is
incorrectly cabled to a fabric element (director or switch).
1. At the HAFM server’s Hardware View for the selected director, click Configure
and choose Ports. The Configure Ports dialog box displays.
2. Use the vertical scroll bar as necessary to display the information row for the port
indicating an invalid attachment.
3. Click the Type field and configure the port from the list box as follows:
• Choose fabric port (F_Port) if the port is cabled to a device (node).
• Choose expansion port (E_Port) if the port is cabled to a fabric element (director
or switch) to form an ISL.
4. Click Activate to save the configuration information and close the dialog box.
Did reconfiguring the port type solve the problem?
Table 2–12: MAP 600: Invalid Attachment Reasons and Actions
Reasons Action
Unknown Contact the next level of
support.
ISL connection not allowed on this port. Go to step 19.
Incompatible switch at other end of ISL. Go to step 20.
External loopback adapter connected to
the port.
Go to step 21.
N-Port connection not allowed on this
port.
Go to step 19.
Non-HP switch at other end of the ISL. Go to.step 20.
Port binding violation-unauthorized
WWN.
Go to step 23.
Unresponsive node connected to port. Go to step 24.