director 2/64 service manual

2–110 director 2/64 service manual
Diagnostics
6
Perform one of the following:
• If the PC has standalone diagnostic test programs resident on the hard drive,
perform the diagnostics. Refer to supporting documentation shipped with the PC
for instructions.
• If the PC does not have standalone diagnostic test programs resident on fixed disk,
go to step 7.
Did diagnostic test programs detect a problem?
NO YES
↓ Refer to the supporting documentation shipped with the PC for instructions to
resolve the problem. Exit MAP.
7
Reboot the HAFM server PC.
1. Choose Start > Shut Down. The Shut Down Windows dialog box displays.
2. At the Shut Down Windows dialog box, choose Shut Down The Computer and
click Ye s to power off the PC.
3. Wait approximately 30 seconds and power on the PC. After POSTs complete, the
Begin Logon dialog box displays.
4. Simultaneously press Ctrl + Alt + Delete to display the Logon Information
dialog box. Type a user name and password (obtained in MAP 0000: Start MAP
on page 2–12) and click OK. The HAFM Services and HAFM applications start,
and the HAFM Login dialog box displays.
5. At the HAFM Login dialog box, type a user name, password, and HAFM server
name (obtained in MAP 0000: Start MAP on page 2–12, and all are case
sensitive), and click Login. The application opens and the Products View
displays.
Did the Products View display and is the HAFM application operational?
NO YES
↓ The PC is operational. Exit MAP.