director 2/64 service manual

director 2/64 service manual 3–1
3
Repair Information
This chapter describes repair and repair-related procedures used by service
representatives for the Director 2/64 and associated field-replaceable units (FRUs).
The following procedures are described:
• Obtaining log information at the HAFM server.
• Displaying and using HAFM server views.
• Obtaining and interpreting port diagnostic and performance data, and performing
port diagnostic loopback tests.
• Channel wrap tests.
• Swapping ports.
• Collecting maintenance data.
• Cleaning fiber-optic components.
• Powering the director on and off.
• Performing a director initial program load (IPL).
• Setting the director online or offline.
• Blocking or unblocking Fibre Channel ports.
• Managing firmware versions.
• Managing configuration data.
• Installing or upgrading software.
Do not perform repairs until a failure is isolated to a FRU. If fault isolation was not
performed, go to MAP 0000: Start MAP on page 2–12.