director 2/64 service manual

director 2/64 service manual 3–5
Repair Information
Product Status Log
The Product Status Log as shown in Figure 3–2, records an entry when the status of a
director changes. The log reflects the previous status and current status of the director,
and indicates the instance of a Product Manager application that should be opened to
investigate a problem. The information is useful to maintenance personnel for fault
isolation and repair verification.
Figure 3–2: Product Status Log
To open the Product Status Log from the HAFM application, click Logs and choose
Product Status Log. The log contains the following columns:
• Date/Time–The date and time the director status change occurred.
• Network Address–The IP address or configured name of the director. This
address or name corresponds to the address or name displayed under the director
icon at the Products View.
• Previous Status–The status of the director prior to the reported status change
(Operational, Degraded, Failed, or Unknown). An Unknown status indicates the
HAFM application cannot communicate with the director.
• New Status–The status of the director after the reported status change
(Operational, Degraded, Failed, or Unknown).
Fabric Log
The Fabric Log reflects the time and nature of significant changes in the managed
fabric.
To display the Fabric Log from the Product Manager application, click Logs and
choose Fabric Log.
• Date/Time–The column displays the date and time of the change in the fabric.