director 2/64 service manual

3–10 director 2/64 service manual
Repair Information
— Link failure-loss-of-signal or loss-of-synchronization.
— Link failure-not-operational primitive sequence received.
— Link failure-primitive sequence timeout.
— Link failure-invalid primitive sequence received for current link state.
See MAP 0600: UPM Card Failure and Link Incident Analysis on page 2–76 or MAP
0700: Fabric, ISL, and Segmented Port Problem Determination on page 2–95 for
corrective actions in response to these link incident messages.
Refresh the Link Incident Log
To ensure recently-created link incidents display in the Link Incident Log,
periodically refresh the log display. To refresh the log, click Refresh at the bottom of
the log window.
Clear the Link Incident Log
To ensure the Link Incident Log is up-to-date and not filled with archived incidents,
periodically clear the log display. To clear the log, click Clear at the bottom of the log
window.
Threshold Alert Log
The Threshold Alert Log as shown in Figure 3–6, provides details of the threshold
alert notifications. Besides the date and time that the alert occurred, the log also
displays details about the alert as configured through the Configure Threshold
Alert(s) option under the Configure menu.